• NEC UPD720200 chipset
• Compliant with ExpressCard Standard Reease 1.0
• Compliant with USB 3.0 Super-Speed(5Gbps),USB 2.0 Hi-Speed(480Mbps),USB 1.1 Low-Speed(1.5Mbps)
• Complaint with xHCI Specification Revision 0.95
• Express Card/34 form factor module
• Max 900mA per port
• OS Support Windows XP/Vista/7(32-bit and 64-bit)
• Bus interface Express Card
• Connectors
• 2 x external USB 3.0 connecton

• NEC UPD720200 chipset
• Compliant with PCI Express Base Specification 2.0
• PCIe 1x bus interface
• Compliant with USB 3.0 Super-Speed(5Gbps),
  USB 2.0 Hi-Speed(480Mbps),USB 1.1 Low-Speed(1.5Mbps)
• Compliant with xHCI Specification Revision 0.95
• Max,900mA per port
• OS Support Windows XP/Vista/7(32-bit and 64-bit)
• Bus Interface PCI-Express x1
• Connectors
  2 x external USB 3.0 connectors
  1 x Molex power connector

4 Port PCI-E CARD TO USB 3.0

System Requirements

l  Windows® XP/Vista/7 (32/64bit)

l  One available PCI Express slot (Recommend PCI Express 2.0)

Features & Specifications

Features:

l  Fully compliant with PCI Express Base Specification Revision 2.0

l  Single-lane(x1) PCI Express throughput rates up to 5Gbps

l  Compliant with Universal Serials Bus 3.0 specification Revision 1.0

l  Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices

l  Supports the following speed data rates as follows:

Low-speed (1.5Mpbs) / Full-speed (12Gbps)/High-speed (480Mbps)/Super-speed (5Gbps)

l  Supports 4 downstream ports for all speeds

l  Built-in 4-pin power connector for receiving extra power supply from system

l  Hot-swapping feature allows you to connect/disconnect devices without powering down the system

l  Support Windows XP/Visata/7(32/64bit)

• USB3.0 to eS-ATA Converter Kit
• USB3.0 Plug to eS-ATA port
• eS-ATA Cable
• AC/DC Power Adapter
• AC Power Cord

USB3.0 to Dual SATA Adapter:

Super Speed USB (USB3.0) and High Speed USB (USB2.0) to SATA.

It is highly integrated with USAT0532 Super speed USB 3.0, high speed USB2.0 and SATA1.5/3.0Gbps self-design PHY

1.       Complies with Gen2i/gen2m of serial ATA II Electrical Specification 2.6

2.       Support SATA II Asynchronous Signal Recovery (Hot Plug) Feature

3.       Support SATA to SATA pass through

4.       Complies with USB 3.0 Specification, USB Mass Storage Class, Bulk-only Transport Specification

5.       Supports USB Super-Speed/High-Speed/Full-Speed Operation

6.       Support USB HID operation

7.       Supports USB2.0/USB3.0/eSATA power saving mode

8.       Supports Dual LUN for USB2.0/USB3.0

9.       Supports Hardware RAID FOR RAID0 (striping) and RAID1(spanning) over USB2.0/USB3.0

10.   Supports AES-128/256 for data encryption over USB2.0/USB3.0/e-SATA

11.   Supports external SPI NVRAM for Vendor VID/PID of USB2.0/USB3.0/Esata device controller

12.   Design for win2000, WinXP, WinVisata, Win7, MAC 9.2 or later version

Maximum transfer rate of 5 Gbps with USB 3.0 and 480Mbps with USB 2.0;
Actual Speed will depend on the hard drives performance
Supports S-ATA devices(hard drives)

• Supports S-ATA Device
• Supports Plug and Play
• AC/DC Power Adapter
  

USB3.0 20P Housing to usb3.0 A-Male

Length:0.5m

5.25" Internal USB3.0 HUB 7 ports

The USB Hub for you easily connecting up to USB 3.0 devices to your computer, such as MP3 player ,digital camera ,or printers,

• Compatible with USB3.0 specification .
• The advanced design keeps optimal speeds when using many USB devices same time to connecting
• Automaticself-power status monitoring.
• 5.25"Bay internal type

5.25" Internal USB 3.0 /2.0 Combo HUB 4+3ports

usb 3.0/2.0 Combo Hub is compliant with USB 3.0/2.0 specification,5.25" internal type.It is the USB Hub for you easily connecting up to 4 USB 3.0 and 3 USB 2.0 devices to your computer,such as an Enclosure Hard disk,Flash drive,MP3 player,digital camera,or printers.

features

• Fully compliant with USB 3.0 and USB2.0 specification
• The advanced desigh keeps optimal speeds when using multiple USB devices simultaneously
• Plug-and-play function
• USB3.0 4 ports and USB2.0 3 ports
• 5.25"Bay/ internal type

USB3.0 20P Housing to USB3.0 A-Mate

+USB3.0 A-Female W/Bracket

Length:0.5m